Shop by Category

Shindaiwa Diaphragm


Does your hedge trimmer diaphragm needs replacement? - Shindaiwa Parts Online has the Diaphragm for Shindaiwa equipment that your Shindaiwa Hedge Trimmer needs

The Shindaiwa HT20 Hedge Trimmer is a well-built, well-engineered, well-priced home trimmer. Not only is it powerful enough to blast through the tallest, thickest grasses, it also accepts brush blades and can plow through saplings with ease. In order, your Shindaiwa HT20 Trimmer remains working at 100% it requires proper maintenance and OEM replacement parts and our store offers you any Shindaiwa Diaphragm you need to keep your yard tool at peak performance.

Does your HT20 Trimmer Shindaiwa Diaphragm need replacement?

Removing the carburetor. Take out the air filter assembly, drain the fuel, Extract the air filter case, remove the Shindaiwa Carburetor. Then, disassemble the carburetor. Get out the rotor cover assembly, withdraw the guide roller and primer bulb, pull out the purge base assembly and the metering cover, remove the metering lever and needle.

Cleaning the carburetor. Cleaning it with chemical spray or an ultrasonic cleaner, remove the excess water from the cleaned components. After that, rebuilding the carburetor. Set up the new metering lever and needle, place the new Shindaiwa Diaphragm and gasket, put the new reed valve and Shindaiwa Gasket, arrange the primer bulb and cover, install the new guide roller, set up the O-ring on rotor cover.

For last, reassembling the unit. Replace the rotor cover and assembly, connect the fuel lines to the carburetor, put back the throttle cable to the carburetor, reinstall the carburetor, resettle the air filter and restate the air filter lid. Do you need any help choosing the right component? Please visit our Contact Section.